Oetiker 1-Ear Clamps are intended for low pressure applications such as automotive, appliances, industrial machinery, underground irrigation systems, etc. They are specifically designed for mass production applications where inexpensive clamps are needed.

Oetiker has the ear with a "dimple". This simple design difference not only adds increased strength to the grip of the clamp, it also creates a spring-like action which permits the clamps to breathe without loosening. We also believe that the mechanical look of the Oetiker 1-Ear Clamp is superior to any other joint. Spotwelding techniques are not used and therefore the possibility of failure due to corrosion at the spot weld is eliminated.

Pressure : As a guideline, Oetiker 1-Ear Clamps (210R) have held 30 bar -441 psi. This was done using a static water pressure test.

Materials : Zinc plated clamps are made of 1008/1010 carbon steel, hot dipped and galvanized to designation G90 (ASTM A 525). It will withstand a salt spray test of 96 hours.

Sold in bag or carton quantities only.
Unit of Measure

Specifications

Brands

N/A Oetiker Seal Fast

Nominal Size

N/A 7/16 in

Closed-Open

N/A 0.381 to 0.444 in

Old Part Number

N/A 113

Pressure Rating

N/A 30 bar441 psi

Material

N/A Zinc Plated

Pieces Per Bag

N/A 100

Additional Information

Additional Information

N/A Pressure: As a guideline, Oetiker 1-Ear Clamps (210R) have held 30 bar -441 psi. This was done using a static water pressure test.

Material: Zinc plated clamps are made of 1008/1010 carbon steel, hot dipped and galvanized to designation G90 (ASTM A