Anti-Seize Shop Aids
anti-seize-shop-aids
TFE™ is recommended for pipe threads carrying water, steam, LP and natural gas, refrigerants, solvents, caustics, dilute acids, oils and diesel fuel. Withstands temperatures to 500 ºF (260 ºC) and pressures to 10,000 psi (Liquid), 2000 psi (gas). /Asset/C119AN-14018.jpg
PTFE Spray Light-Coat is a multi-purpose PTFE powder lubricant that is non-staining and non-oily and will not collect dirt or dust. It is chemically inert, and is an excellent mold release agent. This fast drying dry film lubricant has a very low coefficient of friction which can solve many friction problems. /Asset/C119AN-17075.jpg
S'MOOTH™ Thread Sealants with PTFE
(3) S'MOOTH™ is a general-purpose metal pipe thread sealant for industrial and residential use. This white paste has a smooth consistency and no grit. /Asset/C119AN-15018.jpg PTFE Joint Sealant Tapes
(4) PTFE Joint Sealant is a 100% expanded PTFE gasket material. It comes in a soft, pliable ribbon with a self-adhesive tape applied to one side. It is a tough, flexible and economical universal gasket that replaces cut gaskets in a variety of regular and service applications. PTFE joint sealant will not deteriorate with age. It is unaffected by common chemicals, will withstand pressures up to 3,000 psi and temperatures -450º F to +600º F (-268º C to +316º C). This unique material is highly compressible and will fill severe irregularities in sealing surfaces. /Asset/C119AN-PTFE-Joint-Sealant.jpg TFE™ Pipe Thread Sealants with PTFE
(4) TFE™ is a superior grade, non-hardening, easy to apply, heavy-duty pipe thread sealant. It is formulated to a thick paste consistency, fortified with an extra amount of PTFE and PTFE materials to insure a positive seal with less effort. TFE™ is designed for all pipe fitters, fabricators, plumbers and mechanical contractors. Because of its unique solids content, TFE™ fills thread imperfections and provides leak-proof joints that seal for the life of the connection.TFE™ is recommended for pipe threads carrying water, steam, LP and natural gas, refrigerants, solvents, caustics, dilute acids, oils and diesel fuel. Withstands temperatures to 500 ºF (260 ºC) and pressures to 10,000 psi (Liquid), 2000 psi (gas). /Asset/C119AN-14018.jpg
Cop-Graf™ Copper and Graphite Based Anti-Seize
(2) Cop-Graf™ is a top quality anti-seize compound composed of pure copper particles and graphite in a high heat resistant carrier. It is designed to lubricate and protect threaded connections and flanges at temperatures to 1800 ºF (980 ºC) and extreme load pressure conditions. Cop-Graf™ has water resistant and anti-oxidant properties that prevent seizing and galling, while protecting against rust and corrosion. Cop-Graf™ does not separate. It is non-dripping, non-hardening, permits quick, easy disassembly and removal of connection even after lengthy service or severe conditions. Stress, strain and time to disassemble are greatly diminished. Exceeds MIL-A-907 specifications. /Asset/C119AN-11010.jpg Lubricating Anti-Seize Special™
Anti-Seize Special™ is a superior grade assembly compound and high pressure lubricant. This high quality aluminum, copper and graphite based anti-seize formula has unique particle shapes suspended in special carriers. It will protect metal parts under extreme heat, pressure and contaminating conditions to 2000 ºF (1095 ºC). Anti-seize Special™ is designed with ultra fine metallic and graphite particles enhancing a longer lasting protective film, resisting washout, burn-off and corrosion. Exceeds MIL-A-907 specifications. /Asset/C119AN-18104.jpg Silicone Anti-Seize Special™ Adhesives
(11) 100% RTV Silicone is a multi-purpose, single component adhesive sealant which quickly adheres to most surfaces. It cures in 24 hours to provide a tough, resilient silicone rubber to handle hundreds of applications. 100% RTV Silicone can be used for gasketing, sealing, bonding, insulating, caulking, encapsulating and coating. This flexible material resists shrinking, cracking, weather, ozone, chemicals, moisture, vibration and extreme temperatures ranging from -85° F to +450° F (-65° C) to +232° C) (Hi-Temp Red to 500° F (260° C) continuous and 600° F intermittent exposure). /Asset/C119AN-27087.jpg Anaerobic Sealing Compounds Pipe Sealants with PTFE
(2) Anaerobic Sealing Compounds will withstand temperatures from -65º F to +375º F. Seals to 1,000 psi immediately after application and up to burst rating of typical pipe after curing. Due to its small particle size, will not clog small orifices, valve openings and screens typically found in most hydraulic systems. /Asset/C119AN-22050.jpg Stainless Steel Grade Anaerobic-HD Sealing Compound Sealants
(2) Anaerobic Sealing Compounds will withstand temperatures from -65º F to +375º F. Seals to 1,000 psi immediately after application and up to burst rating of typical pipe after curing. Due to its small particle size, will not clog small orifices, valve openings and screens typically found in most hydraulic systems. /Asset/C119AN-22151.jpg Aerosol PTFE Spray Light-Coat Dry Lubricants
Dry Lubricant and Release AgentPTFE Spray Light-Coat is a multi-purpose PTFE powder lubricant that is non-staining and non-oily and will not collect dirt or dust. It is chemically inert, and is an excellent mold release agent. This fast drying dry film lubricant has a very low coefficient of friction which can solve many friction problems. /Asset/C119AN-17075.jpg
Aerosol All-Purpose 4-Way™ Lubricant & Penetrating oils
All-Purpose 4-Way™ is specially formulated to lubricate and penetrate, leaving parts with a protective anti- rust film. This quality lubricant protects metal parts which helps eliminate pounding and breakage during disassembly. All-Purpose 4-Way has no CFC’s, chlorinated solvents or silicones. /Asset/C119AN-17061.jpg Aerosol A.S.T. Penetrant II™ Lubricating Oils
A.S.T. Penetrant II™ is a heavy-duty, industrial strength penetrant. It quickly penetrates deep through rust, scale and corrosion on frozen nuts and bolts, threaded connections, machinery and tools. Frees metal parts faster than all ordinary penetrant / lubricants. A.s.t. Penetrant II has no cfc’s chlorinated solvents or silicones. /Asset/C119AN-17063.jpg Aerosol Chain and Cable Lubricants
Chain and Cable Lube is a heavy duty lubricant for reducing friction and wear. It is a mixture of penetrants, anti-oxidants, oils and grease; plus molybdenum disulfide which creeps into chain components and cable strands to provide excellent lubrication and rust protection. This lubricant forms a non-gumming thin film providing maximum lubrication and protection under severe conditions. /Asset/C119AN-17040.jpg Industrial Grade Silicone Lubricants
Silicone Lubricant Industrial Grade is a dry non-staining lubricant and release agent that makes everything slide easier with no greasy mess. This non-toxic, odorless and colorless lubricant allows unlimited uses. A universal dry lubricant that waterproofs, protects and rustproof almost any surface. High viscous silicone. Resists breakdown under heavy loads or mechanical shear. /Asset/C119AN-17067.jpg Belt Dressings
Belt dressing is designed for all types of belt drives and will improve performance under the most severe conditions. It will waterproof and preserve all types of belts and will not glaze or cause buildup. Belt dressing does not contain rosin, silicones, sticky oils, varnishes or other harmful substances. /Asset/C119AN-17030.jpg Zinc Cold Galvanizing Sprays
Zinc Cold Galvanizing Spray is a convenient smooth-flowing compound that stops rust, rust creep age and corrosion on any ferrous or non-ferrous metal by providing a zinc-rich coating, which electro chemically bonds with metal resulting in a protective, self-forming oxide. Zinc cold galvanizing spray meets or exceeds the following military specifications: MIL-p-46105 weld thru primer. U.s. Navy galvanizing repair specification MIL-p-21034. U.s. Air force MIL-t-26433 for towers (temperate and arctic zones). Also MIL-p-26915a. /Asset/C119AN-17045.jpg CA-020™ Instant Adhesives
CA-020 Instant Adhesive is a cyanoacrylate adhesive. Ca-020 is a medium viscosity, fast curing product with good elasticity for bonding plastics, metal, rubber, glass and dissimilar materials. It is a versatile adhesive with good thermal, climatic and impact resistance. /Asset/C119AN-23020.jpg Ready-stick™ Putty Epoxies
Ready-stick Epoxy Putty is a hand-mixable adhesive/sealant that hardens like steel in 20 minutes. It will patch holes and cracks, and mend most anything that is broken. Excellent for rebuilding and fabricating parts. An all purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. /Asset/C119AN-34114.jpg Adhesive Sprays
Adhesive Spray is a multi-purpose, pressure-sensitive a designed to form either permanent or temporary bonds between two porous or non-porous materials. Adhesive spray is specially designed for many industrial applications as well as contractor, office, home and hobby use. Adhesive solids are non-toxic, non-irritating and meet requirements for indirect food additives as outlined in Fed. Reg. Paragraphs 121.2507 to 121.2577. /Asset/C119AN-17066.jpg AST Gasket Maker™ Sealants
AST Gasket Maker™ is an anaerobic gasket product designed to replace pre-cut gaskets, or can be used with pre-cut gaskets to enhance their sealing ability. AST Gasket Maker™ cures and polymerizes in the absence of air and presence of metal to form a strong leak proof seal. It can fill imperfections in surfaces up to 0.01" and provides an instant low pressure seal. /Asset/C119AN-50152.jpg Aerosol AST Rubber Coat™ Sealants
AST Rubber Coat™ is a rubberized undercoating and spray sealer in an easy to use aerosol can. When dry, it forms a long lasting barrier that seeps into small cracks to create a waterproof seal that is durable even in extreme temperatures. AST Rubber Coat™ forms a protective barrier that seals out moisture, deadens noise, and forms a protective barrier to prevent further corrosion. /Asset/C119AN-17048.jpg Anti-Seize Anaerobic Thread Sealants
(4) Features & Benefits :- Non-shredding / Non-contaminating.
- Made for high pressure fluid power systems.
- Easy to apply / non-destructive disassembly.
- Temperature resistance of -60 to +350° F (-51 to +176°C)
Hand and Tool Cleaning Wipes
Hand and Tool Wipes are designed for use in industrial and manufacturing settings. Each towel is pre-moistened with a powerful cleaning formula capable of cleaning hard working hands as well as non-porous surfaces. Each towel is made from an abrasive, yet non-scratching fabric that helps lift away heavy deposits of grime and dirt of hands and surfaces. /Asset/C119AN-49370.jpg Aerosol Slickon Flow-Lubricants
SLICKON Flow-Lube is an advanced blend of high performance, low viscosity petroleum oils that provide long lasting lubrication for moving or sliding parts. It contains special wetting agents that help to penetrate grime so the lubricant maintains contact with the surface. /Asset/C119AN-17064.jpg Aerosol Graphite Sprays
Graphite Spray contains a high purity graphite along with an organic binder that will adhere the coating to most surfaces. This leaves a dry, tack-free film of highly lubricous graphite which will lubricate and reduce friction in parts so they slide or rotate easily. /Asset/C119AN-17041.jpg Aerosol Metal Parts Protector Coatings
Metal Parts Protector Light Coat is a rust and corrosion preventative coating in an aerosol can. It will protect your parts during storage or transportation. It protects parts from weather, humidity, chemical vapors, and salt exposure. /Asset/C119AN-17043.jpg SOF-Set Premium General Purpose Compounds
(3) Sof-Set is a soft setting, pliable, slow drying, thread sealing compound. This slow drying feature allows the user to keep the can open during application without fear of solvent loss. /Asset/C119AN-Soft-SET.jpg TUF-Set™ High Performance Compounds
(4) Tuf-Set™ is a high performance pipe thread sealant specifically designed for threaded connections commonly used in heating, ventilation and refrigeration, HVAC, commercial and residential plumbing, and industrial applications. It is fast drying, firm setting, and will stay flexible to resist vibration loosening. /Asset/C119AN-Tuf-SET.jpg Nickel-Graf PTFE Joint Sealants
(2) Nickel-Graf is a premium quality anti-seize lubricant designed especially for maximum resistance to the most corrosive and extreme temperature environments. Performs to temperatures of 2600 ºF (1426 ºC). Nickel-Graf is composed of pure colloidal nickel and graphite flakes dispensed in a superior high performance petroleum carrier. It does not contain any copper, lead or moly disulfide. Nickel-Graf will not poison catalyst beds, reaction chambers or special alloy fittings. It is safe to use with anhydrous ammonia, acetylene and other vinyl monomers. Exceeds MIL-A-907 specifications. /Asset/C119AN-13008.jpg
